DIMENSIONED DRAWINGS

We will supply dimensioned drawings within 2 weeks of each customer enquiry.

This requires the customer to supply their own dimensioned sketch or drawing of the sensor types(s) they require either directly or via their local distributor.

 

REQUIRED OPERATIONAL TEMPERATURES

The sketch or drawing must show the required operational temperatures of the sensor as follows:

  1.           Sensor Tip
  2.           Sensor Body Lower
  3.           Sensor Body Upper and MI Cable

 

REQUIRED MI CABLE LENGTHS

The sketch or drawing must show the required length of MI cable and flexible extension cable (if required). Flexible extension cables are available directly from Fylde Electronic Laboratories Limited.

 

MI CABLE CONNECTORS

The MI cable is terminated with LEMO plug FFC.00.650.CLAC.35 that has an operational temperature of 200˚C as standard.

 

ANTI-VIBRATION BRACKET

We supply anti-vibration cable clamps to minimise signal noise due to excessive connector vibration – please see the “Accessories” section of our web site.

 

CUSTOMER QUOTATION and DRAWING ACCEPTANCE

Our formal quotation will follow within 1 week from receipt of a customer’s written acceptance of our drawing(s) and intent to proceed with the project.

 

ORDER ACKNOWLEDGEMENT

We will issue an Order Acknowledgement 1 week from of receipt of a customer’s Purchase Order together with the planned delivery timescales for the order.

 

DELIVERY TIMESCALES

Delivery of standard sensor types is typically 8 weeks from receipt of order. Delivery of non-standard sensors is typically 12 weeks from receipt of order.

 

STANDARD TERMS & CONDITIONS OF SALE

Click Here for our Standard Terms & Conditions of Sale.